Owner's manual

MTS Criterion
®
Series 40 Product Manual
36
Specifications
Introduction
Common Specifications
The following specifications are for all MTS Criterion frames. Specifications for
the specific models are located in the following tables.
C
ALIBRATION STANDARD ISO 7500 CLASS 0.5 OR ASTM E4 ISO 7500 CLASS 1
Force range 1-100% of rated force capacity 0.5-1% of force rated
capacity
Rated force capacity at max test speed 100%
Maximum test speed at rated force
capacity
100%
Force indicating accuracy ± 0.5 % of indicating
Speed accuracy
Set speed < 0.01 mm/min: speed accuracy is within ± 1.0% of set
speed
Set speed ≥ 0.01 mm/min: speed accuracy is within ± 0.2% of set
speed
Position accuracy Within ± 0.5%
Strain accuracy ASTM E83 or ISO 8513
Security protection Over-Force, travel limits, over-voltage and others
Over force protection 10%
Data acquisition rate
1000 Hz
Control loop rate
1000 Hz
Environmental requirements
Operating temperature
Operating humidity
Storage temperature
Maximum storage humidity
Maximum altitude
For indoor use only
5-40°C (41-104°F)
5-85% Noncondensing
-18-49°C (0-120°F)
90% Noncondensing
2000 m (6562 ft)
Motor and drive system
AC Servomotor
Ball screws
Preloaded
Position measurement Encoder
Additional DC conditioning channels 2 channels
Additional incremental encoder
conditioning channels
1 channel
Criterion_product manual.book Page 36 Monday, July 28, 2014 3:52 PM