Owner's manual

Handset Control
MTS Criterion
®
Series 40 Product Manual
Operation
115
7 Connector
RJ-45, to Controller.
8 Crosshead Return
Returns the crosshead to the original position (zero point).
9 Start
Starts the test action. Only if the testing software is active.
10 Crosshead Down
Moves the crosshead in the downward direction while depressed. Only
if Handset Enable is active.
11 Crosshead Up
Moves the crosshead in the upward direction while depressed. Only if
Handset Enable is active.
12 Fault
When lit, indicates an active fault or interlock.
13 Handset enable
Pressing with an interlock active attemps to clear the interlock.
Pressing when there are no active interlocks enables the handset for
local control.
When the indicator is lit, the handset is enabled for control of the
crosshead.
14 Display
Four lines, 20 characters per line.
Handset Controls and Indicators (part 2 of 2)
Criterion_product manual.book Page 115 Monday, July 28, 2014 3:52 PM