Owner's manual

Load Cell Mounting
MTS Criterion
®
Series 40 Product Manual
Operation
113
Load Cell Bolt Torque Specifications
L
OAD CELL TYPE BOLT THREAD LUBE AND TORQUE TO:WRENCH SIZE
1 N S-Beam M3 5 N•m M2 hex
5 N-250 N S-Beam M6 x 1 mm 5 N•m M5 hex
500 N-2 kN S-Beam M6 x 1 mm 10 N•m M5 hex
5 kN S-Beam M12 x 1.25 mm 20 N•m M10 hex
100 N- 500 N
Low Profile
Bending Beam
M6 x 1 mm 10 N•m M5 hex
1 kN- 5 kN
Low Profile
Shear Beam
M12 x 1.25 mm 20 N•m M10 hex
10 kN
Low Profile
Shear Beam
M12 x 1.25 mm 40 N•m M10 hex
20 kN
Low Profile
Shear Beam
M12 x 1.25 mm 65 N•m M10 hex
30 kN
Low Profile
Shear Beam
M12 x 1.25 mm 90 N•m M10 hex
50 kN and 100 kN
Low Profile
Shear Beam
M27 x 2 mm
27 N•m
*
M6 hex
150 kN
Low Profile
Shear Beam
M27 x 2 mm
90 N•m
*
M10 hex
200 kN and 300 kN
Low Profile
Shear Beam
M36 x 2 mm
90 N•m
*
M10 hex
500 kN and 600 kN
Low Profile
Shear Beam
M72 x 2 mm
170 N•m
*
M16 hex
* Torque supernut jackbolts to the torque specified in the table in a crisscross pattern. Bring jackbolts to
33% of full torque, then bring to 66% of full torque, and then to 100% full torque.
Criterion_product manual.book Page 113 Monday, July 28, 2014 3:52 PM