Owner's manual

Advantage™ Pneumatic Grips
Selecting Face Surfaces
Operation
42
Grip Faces for the 200 N and 2000 N Grips
The faces for the 200 N (40 lbf) and the 2000 N (450 lbf) Advantage Pneumatic
Grips are compatible and the same as the ones used on MTS Screw Grips. The 25
x 25 mm (1.0 x 1.0 in) size is preferred for the 200 N grip; the 38 x 58 mm (1.5 x
2.28 in) size is preferred for the 2000 N grip.
12.5 mm x 25 mm
(0.5 in x 1 in)
25 mm x 25 mm
(1 in x 1 in)
Table 2:
Face Surface Part Number
Obsolete P/N
*
* Obsolete part numbers are associated with older grips. Current part
numbers are direct replacements.
Rubber (smooth)
†
† Rubber grip faces are for use only at room temperature.
056-163-825
Table 3:
Face Surface Part Number
Obsolete P/N
*
* Obsolete part numbers are associated with older grips. Current part
numbers are direct replacements.
Smooth 056-163-801
Corrugated 056-163-802 38.00689
Serrated 056-163-803 38.00690
Diamond Tip 056-163-804 38.00593
Rubber (matte)
†
† Rubber grip faces are for use only at room temperature.
056-163-805 38.00692
Rubber (corrugated)
†
056-163-806 38.00691
Rubber (smooth)
†
056-163-807 38.00424
Line Contact r=4.75mm 056-163-808 38.00693
Line Contact w/Rubber
Opposite
†
r=4.75mm
056-163-826 none
Line Contact w/Rubber
Opposite
†
r=2.5mm
056-163-829 38.00544