Manual

Understanding the Load Train
It is important to understand the components in the load train. When installing and removing the specimen
and performing test setup, you interact with elements of the load train.
The load train consists of all the components between the actuator’s piston rod (the component that moves
up and down) and the base of the T-Slot table. This typically includes the load cell, the upper grip, the
specimen, the lower grip, and the load cell (force sensor), as shown.
Note:
The load cell may also be mounted to the T-Slot table.
Typical Components in the Load Train
DescriptionItem
Actuator1
Force Sensor (Load Cell)2
Grip Attachment Hardware3
Upper Grip4
90 | MTS Acumen
™
Key Concepts