Manual

DescriptionNameItem

Select the units of measurement shown on the slider control.Display Unit2

Indicates the minimum and maximum range allowed on the

slider according to the units of measurement in Display

Unit.

Range Minimum,

Range Maximum

Enter the minimum range for the slider control.Range Minimum4

Enter the maximum range for the slider control.Range Maximum5

The smallest increment used in the slider range and the

distance it will move when you click the slider arrows.

Resolution6

Program Control Panel

Use the Program Control panel to start, pause, and stop a test run.

Program Control Panel

DescriptionControl

Run — Start a test, resume a test that is held, or restart a test procedure that

is stopped. When the test is in the Run state, the button illuminates, and the

background is black.

Hold — Pause the test at the end of the current cycle or at the end of the current

non-cycle command activity. Click Run to resume the test run. You cannot

unload a test run that is held. When the test is in the Hold state, the button

illuminates, and the background is black.

Stop — Stop the test in place. The current cycle or command activity is not

completed. Click Run to restart the test. You can unload a test that is stopped.

When the test is stopped, the button illuminates and the background is black.

Test Run Status Panel

The Test Run Status panel provides a Stop Procedure button and information about which test run is being

processed, its status, and running time.

56 | MTS Acumen

™

System Introduction