Instruction manual

CIS ANI Digits Manipulation and Gateways Enhancements Page 1057 of 3156
Features and Services
LD 10 - Configure the CAC for CIS and MFC signaling for analog 500/2500 sets.
- VMB aaaa Voice Mailbox.
- ANIE (0)-N ANI Entry: it is of (0)-N where N=S_SIZE in customer data
block.
If ANIE=0, no entry is associated with the set. The old
mechanism will be used for building the ANI message.
If ANIE is of 1-N:
• If ANIC = YES for the outgoing CIS route where the
call takes place, then the components of the ANI
message are retrieved from the ANI entry in
Customer Data Block, if configured.
• If the given ANI Entry is not configured, or if ANIC =
NO for the outgoing CIS route where the call takes
place, then the old mechanism is used for building
the ANI message.
... ... ...
Prompt Response Description
REQ: NEW
CHG
Add new data.
Change existing data.
TYPE: 500 Type of data block for analog (500/2500) set.
TN l s c u
c u
Terminal number for Options 51C through 81C.
Terminal number for Option 11C
CUST xx Customer number.
xx = 0 - 99 for Options 51C through 81C.
xx = 0 - 31 for Option 11C.
... ...
SFLT a..a Secretarial Filtering.
CAC_CIS 0-(3)-9 CIS ANI Category Code.
CAC_MFC (0)-10 MFC CNI Category Code.