Instruction manual

Page 1056 of 3156 CIS ANI Digits Manipulation and Gateways Enhancements
553-3001-306 Standard 10.00 January 2002
LD 10 - Define ANI entry for analog (500/2500) sets.
- ADDG 0-(8)-99...99 Additional digits used in ANI message if ANIC is NO or if
ANIC=YES but the ANI entry associated with the
originator of the call is not configured.
It is used to complete ANI DN if LEC+ANI DN consists of
less than ANSZ digits.
Prompted for outgoing CIS route.
It can be from 1 digit long up to ANSZ digit long.
- ANDN 0-99...99
X
Default ANI DN. It can be from 0 digit long up to ANSZ
digit long.
Prompted for outgoing CIS route.
Used for building ANI message if ANIC=NO and DN of
set is not allowed to be sent (CLS DNAD).
Also used if ANIC=YES but the ANI entry associated with
the originator of the call is not configured, and DN of set
is not allowed to be sent (CLS DNAD).
Remove ANDN.
Prompt Response Description
REQ: NEW
CHG
Add new data.
Change existing data.
TYPE: 500 500 set.
TN l s c u
c u
Terminal number for Options 51C through 81C.
Terminal number for Option 11C
CUST xx Customer number.
xx = 0 - 99 for Options 51C through 81C.
xx = 0 - 31 for Option 11C.
... ... ...
DN xxxx ccc Directory Number, CLID entry.
- MARP (NO) YES Deny/Allow Multi Appearance Redirection Prime.
- CPND aaaa Calling Party Name Display.