Instruction manual

Loop Start Supervisory Trunks (Incoming Calls) Page 1935 of 3156
Features and Services
Feature implementation
Task summary list
The following task is required:
LD 14 – Create or modify trunk data blocks on a per trunk basis.
LD 14 – Create or modify trunk data blocks on a per trunk basis.
Feature operation
No specific operating procedures are required to use this feature.
Prompt Response Description
SIGL LOP Loop start supervision.
Prior to Release 20.0x program the following:
CLS Class of Service
(LNT)
BST
Loop start Non-supervised Trunk.
Both Way Supervisory Trunk - Supervision on both
incoming and outgoing loop start PSTN (CO) trunks.
For Release 20.0x and later program the following:
SUPN YES, (NO) Trunk Supervision required (not required).
STYP BST Both way Supervisory Trunk - Supervision on both incoming
and outgoing loop start PSTN (CO) trunks.