Instruction manual

CIS ANI Digits Manipulation and Gateways Enhancements Page 1055 of 3156
Features and Services
CISR YES (NO) CIS Route
- ANSZ (7)-15 ANI information size. Response is length of LEC+ANI
DN.
For analog routes, the only valid response is seven (7).
- ANIC (NO) YES ANI Composing
Prompted for outgoing CIS route.
If ANIC=NO, old ANI composing is used: if the originator
of the call is a set, ANI message will consist of the CAC of
the originator + the LEC of the outgoing route + the DN of
the originator or the ANDN of the outgoing CIS route,
depending on the class of service (DNAA/DNAD) of the
set. If the originator of the call is an incoming route, the
components of the ANI message are retrieved from
default ANI entries and/or from the data block of the
outgoing CIS route (See “CIS Gateways Enhancements
feature implementation” on page 1062.)
If the outgoing CIS route requires new ANI composing to
be used (prompt ANIC=YES), the following is done:
If no entry is associated to the calling set (ANIE=0), then
old ANI composing is used.
If an ANI entry is associated to the calling set (ANIE has
a non-zero value), but the associated ANI entry is not
configured, then old ANI composing is used.
If an ANI entry is associated to the calling set (ANIE has
a non-zero value), and the associated ANI entry is
configured, then ANI table will be used for building the
ANI message: none of the components of the ANI
message will be retrieved from the data block of the
outgoing CIS route.
- LEC 0-99...99
X
Local Exchange Code of the route. It can be from 0 digit
long up to ANSZ digit long. Prompted for outgoing CIS
route. Used for building ANI message if ANIC is NO or if
ANIC=YES but the ANI entry associated with the
originator of the call is not configured.
Remove LEC.