Instruction manual

Page 1926 of 3156 LOGIVOX Telephone
553-3001-306 Standard 10.00 January 2002
The LVXA Class of Service cannot be defined or changed through Attendant
Console overlay 12. In addition, LXVA Class of Service telephones cannot
be tested through overlay 31.
A telephone assigned LXVA Class of Service cannot be a maintenance set.
The LVXA Class of Service should only be given to a LOGIVOX telephone.
Feature interactions
Digit Display
During manual dialing or last number redial, the display shows the dialed
digits, even if the set has display denied Class of Service. If the set has
LOGIVOX denied Class of Service, each digit is shown twice.
On-hook Dialing
Because of the firmware on the LOGIVOX set, the DN key 0 is automatically
selected when the first digit is dialed, and no other DN has been selected.
Feature packaging
This feature is packaged under International Supplementary Features
(SUPP), package 131.
Feature implementation
Task summary list
The following task is required:
LD 11 – Modify the system hardware and software parameters to allow
logivox Class of Service: