Instruction manual

Page 1054 of 3156 CIS ANI Digits Manipulation and Gateways Enhancements
553-3001-306 Standard 10.00 January 2002
LD 16 - Create or modify outgoing CIS route data block.
- S_ENTRY aa
Xaa
Xaa Xbb
ANI entry for a set to be created or modified.
ANI entry for a set to be deleted.
ANI entries (aa-bb) for a set to be deleted.
Prompted only if S_SIZE is greater than 0.
ANI entries must be between 1 and S_SIZE.
If REQ=NEW, this prompt and its subprompts are
given only once. If REQ=CHG, they are repeated
until S_ENTRY is answered with <CR>.
- - DNLG 0-(4)-15 Directory Number Length.
- - LEC 0-99...99
X
Local Exchange Carrier.
Delete LEC.
- - ADDG 0-(8)-99...99 Additional digits, 1 to 15 digits long.
- - ANDN 0-99...99
X
Used as ANI DN if DN Length = 0.
Delete ANDN.
... ... ...
Prompt Response Description
REQ NEW
CHG
Add new data.
Change existing data.
TYPE RDB Route Data Block
TKTP DID
COT
Direct Inward Dial.
Central Office Trunk.
ICOG OGT Outgoing Route.
... ... ...
CCBA (NO) YES Deny/Allow collect call blocking.