Instruction manual

Page 1882 of 3156 Limited Access to Overlays
553-3001-306 Standard 10.00 January 2002
• Access to Print Routine Overlay 20 may or may not include access to the
Speed Call lists.
• Access to the Configuration Record (CFN) Overlay 17 can be restricted
to:
— no access at all to Overlay 17
— changing a user’s own password only
— full access to modify the system configuration
• With the Print Only option defined, certain users are limited to the
following:
— Access only to administration Overlays that contain print
commands, and can only use the print commands in those Overlays.
— Full access to all print routines: Overlay 20-22 and Overlay 81-83.
— System commands in Traffic Overlay 02 are accessible only to users
with access to all customers. Customer-defined commands are
accessible according to the customer numbers defined for each
password.
Only the highest level password users – Level 2 or PWD2 – can configure or
change access for other passwords. These users are the administrators.
Implementing and using the LAPW feature does not interfere with the use of
any existing passwords in the system. For a complete listing of the passwords
currently used, refer to Overlay 17, prompts PWD2, NPW1, NPW2, and
Overlay 15, prompts ATAC and SPWD in Software Input/Output Guide -
X11 Administration (553-3001-311).
Each password can access up to 32 customer-tenant combinations. Each
combination is defined by a number designator that includes the customer
number (0-99) and the tenant number (0-511).
Each new Limited Access Password (LAPW) must be:
• any combination of numbers and letters (uppercase letters only)
• four to sixteen characters in length with no spaces