Instruction manual

Last Number Redial Page 1877 of 3156
Features and Services
Off-Hook Alarm Security
Off-Hook Alarm Security treatment may apply to these features if the ASTM
expires.
Speed Call
A number dialed using Speed Call will become the LNR number on all
telephones, except the M2317 and M3000.
Speed Call, System
A number dialed using a System Speed Call key becomes the Last Number
Redial number on all telephones, except the M2317 and M3000. A number
dialed using SPRE-activated System Speed Call becomes the Last Number
Redial number on all telephones. The original Class of Service and NCOS
restrictions of the telephone apply when using Last Number Redial.
Three Wire Analog Trunk – Commonwealth of Independent States
(CIS)
Last Number Redial on an E3W trunk will fail for toll calls. The reason is that
E3W trunks do not wait for the ANI request from the Public Exchange, that
is expected to appear after the toll access code is dialed. The Public Exchange
will not accept the call due to the failure to receive ANI information.
Transfer
When a M2317 telephone transfers a call, goes on-hook and activates Last
Number Redial (LNR), the LNR feature redials the last number dialed during
the transfer. However, on sets other than the M2317, LNR dials the DN dialed
prior to transfer.
Feature packaging
Last Number Redial (LNR) package 90 has no feature package dependencies.
Feature implementation
Task summary list
The following is a summary of the tasks in this section:
1 LD 15 – Enable or disable LNR for a customer.
2 LD 10 – Add or change LNR for analog (500/2500 type) telephones.
3 LD 11 – Add or change LNR for Meridian 1 proprietary telephones.