Instruction manual

Last Number Redial Page 1875 of 3156
Features and Services
Autodial Tandem Transfer
Normally, when the ADL key is pressed during the dialing stage, the ADL
number will replace the Last Number Redial number. In the ATX feature,
however, when the ADL key is used during the established stage, the ADL
digits will not substitute the Last Number Redial number.
Automatic Redial
An Automatic Redial (ARDL) call can be activated on a number dialed using
the Last Number Redial (LNK) key or by pressing the DN key twice. The
ARDL number is saved as the last number redialed.
Call Forward/Hunt Override Via Flexible Feature Code
The Call Forward/Hunt Override via Flexible Feature Code and the dialed
DN are stored under Last Number Redial.
Call Modification
When a Call Modification takes place at the called Directory Number, the
originally dialed number and not the number reached through Call
Modification is stored as the LNR. This applies to the following features:
• All Call Forward features
• Call Pickup
• Conference
• Hunting
• Integrated Messaging System (IMS) when using Operator Revert, and
• Transfer.
The stored LNR number will not be affected when making calls using the
following features:
• Numbers dialed on Call Transfer or Conference
• Attendant Recall from Meridian 1 proprietary telephones (using key)
• Call Park
• Dial Intercom
• Group Call, and
• Special Services Access Codes.