Instruction manual

Page 1048 of 3156 CIS ANI Digits Manipulation and Gateways Enhancements
553-3001-306 Standard 10.00 January 2002
Example 2 - Gateway call through node 2 to CO B
In this example, received CNI on route 230 is 647678, with CAC translated
to DGT 8. Outgoing ANI is 555 123 7678 1.
Example 3 - Gateway call through node 1 to CO A
In this example, received CLID on route 120 is 25. Outgoing ANI is 444
123456123 25 5.
Operating parameters
This section lists the operating parameters for CIS ANI Digits Manipulation
and CIS Gateways Enhancements.
CIS ANI Digits Manipulation operating parameters
The data in ANI is built only once at the beginning of the call. The data is not
changed or re-downloaded for any kind of operation during a call. Therefore,
if the call goes through any type of modification such as a transfer or call
forward for instance, the ANI information sent when requested is of the
original originator of the call.
This feature does not allow the user to associate ANI entry to attendant
consoles. When an outgoing call is originated by an attendant, the ANI
message is built using the old mechanism.
Table 37
Example 2 - Detail of built CAC
LEC Incoming
Additional
digit
DNLG*CNI Category Code
555 123 7678 1
Example 3 - Detail of built CAC
LEC Incoming
Additional
digit
DNLG*CLID Category Code
444 123456123 25 5