Instruction manual

Inventory Reporting Page 1853 of 3156
Features and Services
Operating parameters
This feature is compatible with all Meridian 1 systems.
When a telephone is installed, but not configured in software, the system has
no record of the telephone, and therefore, will not be inventoried. A telephone
that is installed, but configured in software as a different type of telephone,
may not be included in the inventory file.
The Inventory Reporting feature can only report ID PROM information from
cards and telephones that are physically present. If a card or telephone is
configured in software, but is not present in the system, then the ID PROM
information will not be inventoried.
Any new cards, or existing cards, that emulate another type of card in the
system, when inventoried is noted to have the card type of that emulated card,
and not its correct card type. The correct engineering code and vintage of the
actual card is listed in the Card ID PROM information, if available.
When there is a dual processor (redundant) system, the Inventory Reporting
feature will not incorporate the standby processor and associated cards
(Central Processor and Core Network Interface cards) in the card report.
Inventoried cards
Table 77
Card types are included in the Card Inventory file
Card
Mnemonic
Card Description Product
Engineering
Code
Vintage Market
BRSC Basic Rate Signaling
Concentrator
NT6D72 AA North America
CMDU Core MultiDrive Unit NT6D64 AA North America
CNI Core to Network Interface NT6D65 AA North America
COT CO Trunk NT5K93 AA, AB, BA,
BB
Global
CP CP68030/24MB, Call Processor NT6D66 AA Global
CP CP68030/48MB, Call Processor NT9D66 DA Global
CP-2 CP68040/48MB, Call Processor NT9D19 AA, AB Global