Instruction manual

Page 1842 of 3156 International Meridian 1
553-3001-306 Standard 10.00 January 2002
Meridian 1 supports the configuration of the minimum/maximum flash
timing on a system basis only (non-Meridian 1 configuration could be done
on a customer basis).
Feature packaging
This feature is included in base X11 System Software.
Feature implementation
Task summary list
The following is a summary of the tasks in this section:
1 LD 17 – Configure the configuration record for 16-Button Dual-tone
Multifrequency (DTMF) detection.
2 LD 13 – Configure DTR, TDET, and DTD cards for this feature.
3 LD 97 – Configure system parameters for peripheral equipment in
configuration record 2.
LD 17 – Configure the configuration record for 16-Button Dual-tone Multifrequency (DTMF)
detection.
LD 13 – Configure DTR, TDET, and DTD cards for this feature.
Prompt Response Description
REQ CHG Request.
TYPE PARM Change system parameters.
...
-ABCD (NO) YES 16-tone DTMF operation enabled.
Prompt Response Description
REQ aaa Request (aaa = CHG, END, MOV, NEW, or OUT)
TYPE a...a Type of data block (a...a = DTD, DTR, MFC, MFE, MFK5,
MFK6, MFR, TDET, CMOD or XTD)