Instruction manual

Page 1830 of 3156 Intercept Treatment
553-3001-306 Standard 10.00 January 2002
Operating parameters
When Intercept to RAN is desired, a recording device is required. A Recorded
Announcement (RAN) route and at least one trunk must be defined (see the
RAN feature module).
Intercept Treatment (INTR) for these types of calls can be specified in the
Customer Data Block (LD 15) for the situations listed in Table 68.
Table 68
Intercept Treatment for various types of calls.
Intercept situation Telephone
Attendant
extended
calls
Calling Party
TIE trunk
(including
attendant)
CCSA/DID
trunk
Access denied
(ACCD)
C(O) C(O) C(O) C(A)
Call to vacant number
(CTVN)
C(O) C(O) C(O) C(A)
Maintenance busy number,
RPE failure
(MBNR)
C(O) C(O) C(O) C(A)
Code or toll restricted call by
Toll Denied (TLD) station or
TIE trunk
(CTRC)
C(O) NA C(O) NA
Calls to LDNs
(CLDN)
C(O) C(O) C(O) NA
O = overflow tone
A = intercept to the attendant
C = choice of overflow tone, attendant, or Recorded Announcement (RAN)
NA = not applicable
Note: Items in parenthesis are the default Intercept Treatments. Where an item is preceded with “C”, a
choice can be made between overflow, attendant busy, or a RAN. Four entries are required for each
intercept situation.