Instruction manual

Page 1808 of 3156 Intercept Computer Dial from Directory
553-3001-306 Standard 10.00 January 2002
Post-dial Operation
Attendant Break-in
An attendant can break-in to a call by:
• Dialing an extension DN from the ICT.
• Pressing the Break-in key on the Attendant Console.
Automatic Wake-up
This feature can be requested as follows:
• Press the Wake-up key on the Attendant Console.
• Dial a DN from the ICT.
• Dial an octothorpe sign “#”, and terminate by dialing the requested wake-
up time from the Attendant Console.
The same approach is used to cancel Automatic Wake-up.
Radio Paging Post-dial Selection
To start radio paging an extension DN:
• Dial a DN from the ICT.
• Press the RPA Post-dialing Paging (RPAG) key on the Attendant
Console.
Stored Number Redial
An attendant can dial an extension from the ICT, and then press the Stored
Number Redial key to store the called number (following the rules of the
Stored Number Redial feature).
Other Feature Interactions
Attendant Recall with Splitting
If a set transfers a call to the attendant, or a Meridian 1 proprietary telephone
presses the Attendant Recall (ARC) key and the transferring party has not yet
completed the transfer before the attendant answers, it is not possible to dial
from the ICP (since the transferred party is connected to SRC, and the
transferring party is connected to DEST).