Instruction manual

Intercept Computer Dial from Directory Page 1807 of 3156
Features and Services
Attendant Busy Verify
It is possible for an attendant to Busy Verify in the following manner:
• Press an idle loop key, and press the Busy Verify key on the Attendant
Console, and
• Dial an extension DN from the ICT.
Pre-dial Break-in
It is possible for an attendant to override call forward on a set in the following
manner:
• Press an idle loop key, and press the Break-in key on the Attendant
Console.
• Dial an extension DN from the ICT.
Call Forward/Hunt Override via Flexible Feature Code
Call Forward Hunt Override via Flexible Feature Code can be dialed prior to
dialing the DN from the ICP.
Call Park
An attendant can park a call in the following manner:
• Press the Call Park key on the Attendant Console.
• Dial a DN from the ICT.
• Terminate Call Park operation by pressing the Release key.
Radio Paging Pre-dial Selection
It is possible to start automatic paging in the following manner:
• Dial the pre-dial selection RPA FFC on the Attendant Console.
• Dial a DN from the ICT.
Manual radio paging is started as follows:
• Dial the pre-dial selection RPA FCC on the Attendant Console.
• Dial a DN from the ICT.
• Dial a mode digit, digit information and octothorpe “#” sign.