Instruction manual

Page 1784 of 3156 Integrated Voice and Data
553-3001-306 Standard 10.00 January 2002
LD 11 – Add or change ADM (of an SL-1 telephone/ADM pair) associated with a Data Line Card
(DLC) data port pair.
Prompt Response Description
REQ: CHG Change.
TYPE: SL1 Telephone type.
TN l s c u Terminal Number – loop (0–159), shelf (0–1), card (1–10),
unit (1, 3, 5, 7); the loop, shelf, and card must be the same
as those specified for the companion SL-1 telephone; the
unit must be the next subsequent unit to the companion SL-
1 telephone (e.g., if the unit for SL-1 telephone is 2, the unit
for ADM must be 3).
CDEN SD DD Single or double density card.
CLS WTD Warning Tone Denied.
KEY 0 DN xxxx
1 DN xxx...x
2 TRN
3 ADL x...x
4 RGA
6 SCC 0-8190
or
6 SCU 0-8190
9 RLS
Key 0, data Directory Number; can have up to seven digits if
DN Expansion (DNXP) package is equipped.
Key 1, optional secondary data DN.
Key 2, Call Transfer key (optional).
Key 3, Autodial DN (optional).
Key 4, Ring Again key (optional).
Speed Call Controller, Speed Call List number (optional;
must be on key 6 if equipped).
Speed Call User, Speed Call List number (optional; must be
on key 6 if equipped).
Release key: must be key 9.
Note: Only the feature keys listed above can be assigned to the
Add-on Data Module (ADM). If they are assigned to the ADM, they
must also be assigned to the companion SL-1 telephone on the
same keys(i.e, if the ADM has ADL on key 3, the companion SL-1
telephone must also have ADL on key 3, with the same Autodial
DN).