Instruction manual

Page 1764 of 3156 Instant ISM
553-3001-306 Standard 10.00 January 2002
9 Press the Enter key.
The Keycode is checked for CRC errors and is uploaded to the hard disk.
Enter the following command:
Ensure that the new keycode does not lower ISM limits or reduce
features compared with the existing keycode. If you have determined that
the keycode lowers ISM limits or reduces features, do not continue with
the KNEW command, but contact your Nortel Networks order
management representative.
10 Select the new keycode for activation using the KNEW command.
If the new keycode is eligible for instant activation, it will be activated
without further user action, and the following system message is given:
CCBR020 New Keycode accepted and activated successfully. Sysload is
NOT needed!
Otherwise, if the keycode is not eligible for instant activation, a Sysload
is needed to activate the new keycode and the following system message
is given:
CCBR009 New Keycode accepted. It will be activated during the next
restart.
If KUPL fails, the file is saved to the file “\u\keycode.err.”
11 See “Reverting to the previous keycode with the KRVR command” on
page 1768 if ISM limits are not increased or problems exist.
KDIF REC HD to compare the existing keycode with the new
keycode on the hard disk
KNEW XX to select the new keycode for activation, where
XX = HD for a keycode on the hard drive, or
XX = F1 or F0 for a keycode on the floppy drive on
Core 1 or Core 0.