Instruction manual

Instant ISM Page 1763 of 3156
Features and Services
Instant ISM parameter upgrade using HyperTerminal®
For Options 51C, 61C, and 81C systems, perform the following to instantly
activate a keycode without a Sysload:
For a dual-CPU (redundant) system, leave the system in full redundant mode
(hard-disk and CPU redundancy).
1 On a PC, access the Meridian 1 system (via a modem) with
HyperTerminal® (provided with Windows 95):
• Click the
Start button | Programs | Accessories | HyperTerminal.
2 Double-click the HyperTerminal client to the Meridian 1 system.
3 Log into the Meridian 1 system.
4 Load the Keycode Management Program (LD 143).
5 Click the
Transfer menu in HyperTerminal and select Send Text File.
6 From the
Files of type pull-down menu, select All Files (*.*).
7 Locate and select the keycode file on the PC. Use the Look in pull-down
menu to select the drive on which the keycode is located.
8 Click
Open.
The keycode will be displayed after the KUPL prompt.
Example:
KUPL 0001PBX 0101
9FPAMSRHNN17KRUQAFFSPREQEVMTHIDHRKDJHRKEJR56
LD 143 to load program
KUPL to upload keycodes to the hard disk on the target
system