Instruction manual

Information Notification Service for Japan Page 1751 of 3156
Features and Services
Operating parameters
This feature is only applicable for incoming analog trunks. If the terminating
set/trunk cannot receive the information, then the Analog CLI information
will not be displayed nor transmitted.
As per existing M1 functionality, only the first 16 digits of the Calling Party/
Called Party number will be processed.
Display of Katakana characters is not supported. Any Katakana characters
received will be ignored.
If system initialization occurs while the INS-J information is being sent from
the NT5D39 DXUT-J card to the Meridian 1 software, then any INS-J
information that has not been sent is lost and the call is lost as well, since it is
not an established call. In the case of an established call, the call will be
rebuilt and the display may or may not be maintained.
The system administrator must ensure that the INS-J function is activated for
those trunk ports that are actually connected to a CO with INS-J.
Feature interactions
Attendant Call Extension
When an attendant extends a call from an incoming INS-J trunk, the Analog
CLI information is delivered to the terminating set.
Call Transfer/Blind Transfer
When a set completes a Transfer/Blind Transfer of an incoming INS-J call,
the Analog CLI information is delivered to the terminating set.
Call Forward All Calls/Call Forward No Answer/Internal Call
Forward/Hunt
When a call is redirected via Call Forward All Calls/Call Forward No
Answer/Internal Call Forward/Hunt, the Analog CLI information is delivered
to the terminating set.
CLASS
If the call terminates on a CLASS set then the Analog CLI information is
passed to the CLASS feature.