Instruction manual

Page 1748 of 3156 Information Notification Service for Japan
553-3001-306 Standard 10.00 January 2002
On an incoming call with INS-J, the Meridian 1 extracts information such as:
Calling Party Number, Calling Party Name, Called Party Number, Date and
Time, and, if applicable, Reason for absence of Calling Party Number/Calling
Party Name. This information is passed on to the terminating party, which can
be:
• a trunk
• a terminal or
• an application.
The INS-J information is sent by the CO in Frequency Shifted Key (FSK)
format. The NT5D39 DXUT-J card decodes this information and sends it to
the Meridian 1 software via SSD messages.
The Meridian 1 software extracts the Calling Party Number, Called Party
Number, Calling Party Name, and Date and Time information, and the call
termination follows the existing procedure. For example, if the call is from an
incoming CO trunk, it terminates at the attendant or where designated by the
system’s database; if the call is a DID call, the Meridian 1 software extracts
the information from the INS-J and terminates the call accordingly.
The INS-J information is passed on to the terminating party, which can be:
Trunks
• ISDN
— PRI/BRI
• R2MFC
— DTI/DTI2
— Analog
Terminals
• Digital sets
— SL-1
— Meridian Digital telephones
— BRIL sets