Instruction manual
Page 1736 of 3156 Incremental Software Management
553-3001-306 Standard 10.00 January 2002
Table 60 shows the Overlay 16 header after a route is added.
Table 60
Overlay 16 header after service change
Example 5 – Adding a D-channel (DCH)
Table 61 shows the Overlay 17 header before a D-Channel is added.
Table 61
Overlay 17 header prior to service change
The following is the Overlay 17 implementation table for adding a
D-channel.
LD17 – Add a D-channel at the ADAN prompt.
ROUT 0-511
0-127
Route Number.
For Option 11C.
TKTP RAN Recorded Announcement trunk.
MEM AVAIL: (U/P): 188802 USED: 154954 TOT: 343756
DISK RECS AVAIL: 94
RAN RTE AVAIL: 509 USED: 2 TOT: 511
MEM AVAIL: (U/P): 188857 USED: 154899 TOT: 343756
DISK RECS AVAIL: 94
DCH AVAIL: 7 USED: 8 TOT: 15
AML AVAIL: 5 USED: 4 TOT: 9
Prompt Response Description
REQ CHG Add a D-channel.
TYPE CFN Configuration Record.
ADAN NEW DCH x Add a primary DCH on port x, where x = 0-63.