Instruction manual

Incremental Software Management Page 1729 of 3156
Features and Services
For information on the above features, please refer to the appropriate feature
modules in this guide.
System monitoring
To assist in monitoring system growth, each time an overlay is used, a header
appears in the affected overlay, reflecting the system status. The header
indicates the total, available, and used quantities of TNs, ACD-DNs, ACD
positions, AST DNs, Digital Subscriber Loops (DSLs), Logical Terminal
Identifiers (LTIDs), D-channels (DCHs), Application Module Links (AMLs),
RAN Broadcast routes, and RAN and Music Broadcast connections that are
configured. The counts are updated each time system activity adds or deletes
one of the tracked items. When the limits are exceeded, an error message
appears.
ACD parameters are preset for each system. The numbers in the header are
not necessarily real limits and are subject to system configuration. Contact
your Nortel Networks representative for information regarding your system
limits.
A header, reflecting ISM parameters, is added to the following overlays:
• Overlay 10: analog (500/2500 type) telephones
• Overlay 11: Meridian 1 proprietary telephones
• Overlay 12: Attendant Consoles
• Overlay 13: Digitone receivers and tone detectors
• Overlay 14: trunks
• Overlay 16: routes
• Overlay 17: D-channels (DCH) and Application Module Links (AMLs)
• Overlay 23: ACD-DNs, and
• Overlay 27: Digital Subscriber Loops (DSLs) and Logical Terminal
Identifiers (LTIDs).