Instruction manual

Page 1696 of 3156 ICP Network Screen Activation, Flexible DN, Meridian Mail Interactions
553-3001-306 Standard 10.00 January 2002
• if a set has been configured to have call forwarding to both ICP and
Meridian Mail, retrieving of messages by activating the Message
Waiting key (MWK) can only be done for either ICP or Meridian Mail,
and
• the Message Waiting lamp indication cannot support both ICP and
Meridian Mail simultaneously (i.e., if a set has been configured to have
call forwarding to both ICP and Meridian Mail, and a call is waiting from
both ICP and MM, the Message Waiting lamp goes dark after one of the
messages has been retrieved from either ICP or MM).
Feature interactions
The same interactions apply as for the ICP feature, other than the ones
between Meridian Mail and ICP. The interactions described below also apply.
Attendant Recall
When a call from another node is recalled to the ICP position attendant, it is
presented on the ICP terminal.
Call Forward All Calls
Call Forward Busy
Call Forward No Answer
Hunting
When a call redirected by Call Forward All Calls, Call Forward No Answer,
Call Forward Busy, or Hunt terminates on an Intercept Computer (ICP)
position, a redirected message identification “50” is sent to the ICP computer,
when the call is answered.
Electronic Switched Network)
The only Electronic Switched Network functionality which is supported is
Coordinated Dialing Plan.
Network Call Redirection
For ICP-forwarded calls, the Network Call Redirection reason is Call
Forward Unconditional.
Slow Answer Recall
When an attendant extends a call to a set with call forward active, the slow
answer recall timer at the originating node will be reset for ICP forward.