Instruction manual

ICP Network Screen Activation, Flexible DN, Meridian Mail Interactions Page 1695 of 3156
Features and Services
Meridian Mail Interactions (MMIA)
Meridian Mail and ICP may be configured in LD 15 for the same customer
number, by answering “YES” to both the IMS prompt and the ICP prompt.
Meridian Mail and ICP can then be used by the same customer, independent
of each other. A set may be configured to have its calls forwarded to Meridian
Mail or the ICP, or a mixture of both (e.g., all internal calls can be configured
to be forwarded to Meridian Mail, by setting the ICDN or FDN to the
Meridian Mail Message Center DN, and all external calls to be forwarded to
the ICP intercept position by setting the ECDN to the ICP Message Center
DN).
Operating parameters
For NWSA functionality:
• the ICP has to be connected to all nodes in the network
• the same requirements and limitations apply as for Network Call
Redirection and Network Attendant Service, and
• ICP to network nodes connection, and network node to network node
connections must be via Integrated Services Digital Network (ISDN)
links.
For FXDN functionality:
• the DN sent to the ICP is the originally called station, or in the case of
direct calls, is the calling station, and
• the length of DNs may differ from node to node; however, the node with
the ICT must be configured for the maximum length within the network.
For MMIA functionality:
• ICP and Meridian Mail cannot use the same port; however, ICP and
Meridian mail may be configured on separate ports for the same
customer number