Instruction manual

Page 1680 of 3156 Hunting
553-3001-306 Standard 10.00 January 2002
LD 11 – Add or change Hunting for Meridian 1 proprietary telephones.
Data Port Hunting
Data Port Hunting improves the Hunting operation for data ports and modem
pooling, and improves Ring Again operation for modem pooling.
Up to 255 data ports can be configured as trunks in data port trunk routes. In
addition, the route can be programmed to step to another data port route if all
members in the route are busy.
A data port serves as the interface between the Meridian 1 and a computer or
other data communication device. A data port can be one of the following
devices:
• Standalone Add-on Data Module (ADM) in auto-answer mode (no
modem)
• Any modem that can recognize ringing and simulate off hook or on hook
status
• Standalone ADM in auto-answer mode, connected to a modem
Prompt Response Description
REQ: CHG Change.
TYPE: aaaa Telephone type, where:
aaaa = SL1, 2006, 2008, 2009, 2016, 2018, 2112, 2216,
2317, 2616, or 3000.
TN l s c u
c u
Terminal Number.
For Option 11C.
HUNT xxx...x
000
Hunt DN.
xxxx...x removes the DN from the hunting chain.
Allow Short Hunting only.
LHK xx Last Hunt Key (LHK) number (default is 0).
LHK 0 deactivates Short Hunt.
CLS (HTD) HTA (Deny) allow hunting.