Instruction manual

Page 1676 of 3156 Hunting
553-3001-306 Standard 10.00 January 2002
Group Call
Dial Access to Group Calls
Hunting cannot be applied to a Group Call.
Group Hunt
Group Hunting has priority over Hunting. If the DN attempted for termination
by Group Hunting has HTA COS, and if it is busy, Group Hunting continues
with the next DN in the group instead of following the DN’s hunting
configuration.
Hot Line
Any Hot Line telephone can be assigned Hunting (excluding Short Hunt)
Class of Service, but it applies only to the two-way Hot Line capability.
ICP Network Screen Activation, Flexible DN, Meridian Mail
Interactions
When a call redirected by Call Forward All Calls, Call Forward No Answer,
Call Forward Busy, or Hunt terminates on an Intercept Computer (ICP)
position, a redirected message identification “50” is sent to the ICP computer,
when the call is answered.
Idle Extension Notification
If the attendant dials a busy extension that has Hunting configured and where
all the DNs in the hunt chain are busy, Idle Extension Notification may be
requested towards the dialed extension.
ISDN QSIG Name Display
When an incoming QSIG call with name display presentation allowed is
hunted locally, the calling party’s name information is displayed on the
destination set. With presentation restriction, the calling party’s name
information is not displayed.
Lockout, DID Second Degree Busy, and MFE Signaling
Treatments
Multiple Appearance Directory Numbers
Hunting is controlled by the MADN Redirection Prime (MARP) Terminal
Number (TN). If the MARP system option is disabled, Hunting proceeds as
if MARP did not exist.