Instruction manual

Hunting Page 1675 of 3156
Features and Services
Camp-On
Camp-On, Station
Hunting takes precedence over Camp-On and Station Camp-On.
Capacity Expansion
If more than 16 appearances of the same Directory Number (DN) are
configured, each hunt step is counted as two, to avoid running out of time
slots.
China – Toll Call Loss Plan
Toll pad switching is also provided after call hunting has been completed.
When the toll call is diverted, the diverted party’s pad level is switched back
to its original value (unless it is an OPS station using dynamic switching). The
Toll Loss Plan is applied again for the new call as if it is a direct call. For Call
Transfer, it is provided after the transferring party completes the transfer and
drops out. For Call Forward or Hunting, it is provided when the forwarding
or hunting call is answered.
Digital Private Signaling System #1 (DPNSS1) Executive
Intrusion
If Executive Intrusion is attempted against an extension with a Hunt DN
configured, an attempt will be made to reroute the call to the hunt DN
provided the Hunt DN is on the same node. If the Hunt DN is busy, this
rerouting process is repeated. If all DNs in the Hunt chain are busy, Executive
Intrusion is attempted against the wanted extension originally dialed.
Otherwise, the call will terminate as a simple call on the first idle extension
in the Hunt chain.
Direct Inward Dialing Call Forward No Answer Timer
Hunting takes precedence over the Message Center feature.
Do Not Disturb
If activated, Hunting takes precedence over Do Not Disturb busy indication.
Flexible Feature Code Boss Secretarial Filtering
A boss set with filtering activated is passed over by Hunting; the next hunt
sequence is to the secretary set.