Instruction manual

Hot Line Page 1653 of 3156
Features and Services
Voice Call
The terminating DN of a Voice Call arrangement may be the incoming DN of
a two-way Hot Line. When engineering call-modification paths (such as
Hunting and Call Forward No Answer), the Hot Line Restriction option will
cancel the normal call-modification operation for internal non-Hot Line calls.
Feature packaging
The Flexible Hot Line feature is contained in Enhanced Hot Line (HOT)
package 70. There are no feature package dependencies.
Feature implementation
Task summary list
The following is a summary of the tasks in this section:
1 LD 10 – Add or change Flexible Hot Line for analog (500/2500 type)
telephones at the FTR prompt.
LD 10 – Add or change Flexible Hot Line for analog (500/2500 type) telephones at the FTR
prompt.
Prompt Response Description
REQ CHG Change.
TYPE 500 Telephone type.
TN l s c u
c u
Terminal Number.
For Option 11C.
CLS MNL Manual signaling – requires transfer denied (XFD) Class of
Service.
FTR HOT D 1-31 xxx...x
yyy...y
Add Flexible Hot Line.
1-31 = maximum digits for Hot Line DNs.
xxx...x = Flexible Hot Line DN.
yyy...y = Phantom DN for a two-way Hot Line.