Instruction manual

Group Hunting Queuing Limitation Enhancement Page 1627 of 3156
Features and Services
LD 57 – For the Group Hunt Queuing Limitation Enhancement, responses to the following
prompts are required:
Prompt Response Description
REQ CHG NEW Modify or create data block.
TYPE FFC Flexible Feature Codes data block.
CUST 0-99
0-31
Customer number, as defined in LD 15.
For Option 11C.
FFCT <CR> Flexible Feature Confirmation Tone.
CODE PLDN Pilot DN.
PLDN xxxx
<CR>
Enter Pilot DN to be modified or created.
Enter a carriage return to proceed to next prompt
USE
GPHT
Enter use for Pilot DN.
Group Hunting.
LSNO xxxx Enter group hunt list number. Group hunt list must exist in
LD 18.
HTYP (LIN) RRB Enter either (Linear) or Round Robin as the type of hunting
to be used for the group hunt list.
CFWI (NO) YES Call Forward All Calls Idle:
enter NO if Group Hunting is to skip idle stations with Call
Forward All Calls active, or
enter YES if Group Hunting is to terminate on idle stations
with Call Forward All Calls active.
MQUE ACTM Maximum Queue (maximum number of calls allowed to
queue against the Pilot DN.): enter ACTM (Active
Members) to limit the number of calls allowed to queue to
be less than or equal to the number of active members of
the group hunt list.