Instruction manual

Page 1622 of 3156 Group Hunting Queuing Limitation
553-3001-306 Standard 10.00 January 2002
The following are examples of the treatment calls receive with MQUE set to
the various settings:
MQUE set to 0
1 Pilot DN Z can hunt two sets, A and B. Both of these sets are busy.
2 Set (or DID trunk) C dials Pilot DN Z.
3 If C is a set it receives busy tone and cannot be queued, but if it is a Direct
Inward Dialing (DID) trunk it receives whatever busy treatment has been
requested for that DID route.
MQUE set to 1
1 Pilot DN Z can hunt two sets, A and B. Both of these sets are busy.
2 Set C dials the Pilot DN Z. The call is queued.
3 Set D dials the Pilot DN Z. This call receives busy tone.
4 Set A goes on-hook first. The first call is presented to set A.
MQUE set to ALL
This option disables the Group Hunt Queuing Limitation enhancement. With
ALL selected there is no limit as to the number of calls which can be queued
against the Pilot DN.
Operating parameters
There are no operating parameters associated with this feature.
Feature interactions
Camp-on
No Camp-on tone is provided for Group Hunting.
Music
No music is provided for Group Hunting Queuing Limitation.
Feature packaging
This feature is packaged under the International Supplementary Features
(SUPP) package 131; Group Hunt/DN Access to SCL (PLDN) package 120;
and all PLDN package (120) dependencies.