Instruction manual

Page 1618 of 3156 Group Hunt
553-3001-306 Standard 10.00 January 2002
MQUE
0
1
(ALL)
ACTM
Maximum Queue (maximum number of calls allowed to
queue against the Pilot DN.):
Enter 0 to deny all calls from queuing
Enter 1 to allow only one no call to queue
Enter ALL, the default, to allow all calls to queue (i.e., there
is no limit as to the number of calls allowed to queue), or
Enter ACTM to limit the number of calls allowed to queue to
be less than or equal to the number of active members of
the group hunt list.
Note: The ACTM response is only accepted if the French Type
Approval (FRTA) package (197) is equipped.
LD 57 – Configure Flexible Feature Codes data block for Group Hunt Termination.
Prompt Response Description
REQ CHG NEW Request: Modify or create data block.
TYPE FFC Type: Flexible Feature Codes data block.
CUST 0-99
0-31
Customer number, as defined in LD 15.
For Option 11C.
FFCT <CR> Flexible Feature Confirmation Tone.
CODE GHTA Code to be modified or created: Group Hunt Termination
Allowed.
GHTA x...x Enter code to be dialed to allow group hunt termination on a
set.
CODE GHTD Code to be modified or created: Group Hunt Termination
Denied.
GHTD x...x Enter code to be dialed to deny group hunt termination on a
set.
...