Instruction manual

Group Hunt Page 1615 of 3156
Features and Services
LD 18 – Allow a the creation of group hunt lists. Response are required to the following prompts
when a group hunt list is modified, created, or removed. This overlay disallows the removal of a
group hunt list if it is still associated with a PLDN that exists in LD 57. This ensures that the PLDN
is removed prior to removing the group hunt list.
Prompt Response Description
REQ CHG MOV NEW
OUT
Requested operation: Modify, move, create, or remove a
data block.
TYPE GHT Type of data block: Group Hunt list.
LSNO xxxx List Number: enter Group Hunt list number where the range
of is from 0 to the value enter in response to the MSCL
prompt in LD 17 minus one (i.e., MSCL-1). The response to
the MSCL prompt determines the maximum number of lists
a system may have.
CUST 0-99
0-31
Customer to which this list belongs, as defined in LD 15.
For Option 11C.
Prompted when response to REQ is CHG and response to
LSNO is a carriage return, or when response to REQ is
NEW and response to LSNO is not a carriage return.
PLDN x...x Pilot DN: Prompted when response to LSNO is a carriage
return.
DNSZ 4-(16)-31 Directory Number Size (maximum length of [number of
digits in] DNs that will be stored in this list.): Enter value that
is equal to or greater than the length of the longest entry
expected. 16 is the default.
SIZE
1-96
1-1000
Size of list (maximum number of entries allowed in list).
Range is 1 to 96 entries if response to TYPE is GHT. Range
is 1 to 1000 if response to TYPE is SCL or SSC.