Instruction manual

Page 1610 of 3156 Group Hunt
553-3001-306 Standard 10.00 January 2002
Feature implementation
Task summary list
The following is a summary of the tasks in this section:
1 LD 10 – Allow a group hunt Pilot DN (PLDN) to be entered in response
to the following prompts. The overlay is also modified to disallow the
removal of a DN which is part of a group hunt list. This ensures that the
DN is removed from all group hunt lists prior to being removed from a
set.
2 LD 11 – Allow a new Group Hunting Denied (GHD) key to be assigned
and to allow a group hunt PLDN to be entered in response to the
following prompts. The overlay is also modified to disallow the removal
of the last appearance of a Single Call Non-ringing (SCN), Single Call
Ringing (SCR), Multiple Call Non-ringing (MCN), or Multiple Call
Ringing (MCR) DN which is part of a group hunt list. This ensures that
the DN is removed from all group hunt lists prior to being removed from
a set.
3 LD 12 – Allow a group hunt PLDN to be entered in response to the
following prompt.
4 LD 14 – Allow a group hunt PLDN to be entered in response to the
following prompts.
5 LD 15 – Allow a group hunt Pilot DN (PLDN) to be entered in response
to the following prompts.
6 LD 18 – Allow a the creation of group hunt lists. Response are required
to the following prompts when a group hunt list is modified, created, or
removed. This overlay disallows the removal of a group hunt list if it is
still associated with a PLDN that exists in LD 57. This ensures that the
PLDN is removed prior to removing the group hunt list.
7 LD 20 – This overlay is modified to support the following print sequence
if the PLDN package is equipped:
8 LD 22 – Print “PLDN” when Group Hunt/DN Access to SCL (PLDN)
package 120 is equipped and a package print is requested.
9 LD 57 – Define, change, or print data associated with FFC.
10 LD 57 – Configure Flexible Feature Codes data block for Group Hunt
Termination.