Instruction manual

Page 1590 of 3156 Group Call
553-3001-306 Standard 10.00 January 2002
Call Pickup
This feature can be used to answer a Group Call if it is activated by a valid
telephone in the same Call Pickup group, or by using Directory Number (DN)
Pickup or Group Pickup.
Call Pickup Network Wide
The Group Call feature does not allow a remote party in a Group Call list.
Therefore, a Group Call cannot be picked up by a remote station. If during the
network scanning a Group Call is found, it will be ignored and the network
scanning will continue.
Call Transfer
Conference
Neither Call Transfer nor Conference can be initiated during a Group Call. If
an analog (500/2500 type) telephone user flashes the switchhook during an
established Group Call, the user is dropped from the call.
Directory Number Delayed Ringing
When a group call is made to an SCN/MCN key with Directory Number
Delayed Ringing (DNDR) defined, audible notification will be given after the
DNDR delay has expired.
Display of Calling Party Denied
The calling party’s display shows the DN of the last set to connect into the
Group Call regardless of the Class of Service. The called set displays the
Group Number only.
Hold
Only the originator of a Group Call can put the Group Call on hold.
Hot Line
Hot Lines can be members of a Group Call. They cannot, however, have a
Group Call key.
ISDN QSIG/EuroISDN Call Completion
Call Completion cannot be applied to a Group Call.