Instruction manual

Page 1566 of 3156 Flexible Voice/Data Terminal Number
553-3001-306 Standard 10.00 January 2002
Voice Call
If a dynamic TN has a single appearance DN key that terminates on a Voice
Call (VCC) key, the called party hears a single beep if occupied on another
DN. However, if the called party is a dynamic TN in data mode, the DN key
lamp flashes. A beep is not provided.
Feature packaging
The Flexible Voice/Data Terminal Number feature is contained in M2000
Digital Sets (DSET) package 88.
Feature implementation
Task summary list
The following is a summary of the tasks in this section:
1 LD 11 – Assign the Static Voice Terminal Number.
2 LD 11 – Assign the Static Data Terminal Number.
3 LD 11 – Assign the Dynamic Terminal Number.
LD 11 – Assign the Static Voice Terminal Number.
Prompt Response Description
REQ: NEW CHG New, or Change.
TYPE: xxxx Telephone type, where xxxx = 2006, 2008, 2016, 2216 or
2616.
TN l s c u
c u
Terminal Number where u = 0 - 31.
For Option 11C.
CLS FLXA
VCE
Flexible voice/data allowed.FLXA is only required if voice TN
unit is less than 15.
(FLXD) = Flexible voice/data denied.
This Class of Service can only be assigned to 2006, 2008,
2016, 2216 or 2616 sets. When configured to CLS = FLXA,
Voice Class of Service (VCE) is assigned the upper TN unit
(16 - 31).