Instruction manual

Page 1556 of 3156 Flexible Trunk to Trunk Connections
553-3001-306 Standard 10.00 January 2002
As per the existing operation, answer and disconnect supervision is a
requirement for Transfer and Conference.
Flexible Trunk to Trunk Connections does not support Basic Rate Interface
(BRI) telephone sets or Attendant Console operations.
Flexible Trunk to Trunk Connections supports Analog and ISDN trunks.
R2MFC and AC15 signaling is also supported. Flexible Trunk to Trunk
Connections does not support Service trunks, such as Recorded
Announcement (RAN), Paging (PAG), Dictation (DIC), Music (MUS), and
Automatic Wake Up Recorded Announcement (AWR).
Call Redirection features are not supported with Flexible Trunk to Trunk
Connections.
With Flexible Trunk to Trunk Connections, unless the Trunk to Trunk
Connection feature is configured, two outgoing trunk connections are
blocked for Transfer and unsupervised Conference.
Customer Controlled Routing (CCR), Meridian Link, and Application
Module Link (AML) applications are not affected by the Flexible Trunk to
Trunk Connections feature.
Note: When adding a new telephone set, the default Class of Service is
Flexible Trunk to Trunk Connections Conditional (FTTC). This could
impact an application’s ability to conference or transfer a call to an
outgoing trunk. In the case where this functionality is required, the Class
of Service must be changed on the set to Flexible Trunk to Trunk
Connections Unrestricted (FTTU).
Flexible Trunk to Trunk Connections blocks the initiation of Conference.
Applications, such as Break In, Barge In, Bridging, and Overriding, are not
supported.