Instruction manual

Page 1016 of 3156 China – Flexible Feature Codes
553-3001-306 Standard 10.00 January 2002
When the user goes off-hook and does not dial within the number of seconds
configured for the Autodial Delay timer (ADLD) the busy number is
automatically redialed. If the DN is idle when redialed, the feature is
deactivated, otherwise it remains available for 20 minutes. The feature can be
deactivated manually by dialing the BNRD FFC, or the Deactivate Feature
FFC. The user again hears confirmation tone. Deactivating the feature when
it is not active will still cause confirmation tone to be heard, since the feature
may have just timed out when going off-hook to dial the deactivation code.
Customer Call Forward
Customer Call Forward is activated by dialing the CCFA FFC. Confirmation
tone is given if activation is successful. When Customer Call Forward is
activated, the CFWAC feature is activated with the CFW DN set to the Reply
DN.
CCFW is deactivated by dialing the Customer Call Forward Deactivate FFC,
or the Deactivate Feature FFC (it will also be deactivated by the activation of
certain other features, see the Feature interactions section of this description).
Outgoing Call Barring
Outgoing Call Barring can be activated from a set with OCBA Class of
Service. To activate OCB, the subscriber dials the OCBA FFC, the barring
level desired, and the Station Control Password. An octothorpe must also be
dialed from Meridian 1 proprietary telephones and analog (500/2500 type)
telephones. If activation is successful confirmation tone is given. If the
feature is not activated overflow tone is given.
The feature is deactivated by dialing the OCBD FFC, then the active level,
and the Station Control Password. An octothorpe must also be dialed from
Meridian 1 proprietary telephones and analog (500/2500 type) telephones.
The subscriber may dial the OCBV FFC to verify that OCB is active.
Confirmation tone is heard if OCB is active, otherwise overflow tone is heard.