Instruction manual

Flexible Tone and Digit Switch Control Page 1535 of 3156
Features and Services
• off-hook queuing tone
• set relocate tone
• telset messaging alert tone
• telset messaging OK tone
• telset status update tone
Three exceptions to the categories of tones described so far are special dial
tone, expensive route warning tone, and precedence call waiting tone. These
tones are flexible only in their sound and not in their cadence.
Also included are distinctive or precedence ringing for 500/2500-type,
M1000-series, SL-1, and digital telephones. Refer to LD 56 in the
Administration (553-3001-311) for the identification of these tones and
cadences.
The tone and ringing requirements of the customer determine which TDS is
required.
This feature also provides the following:
• an additional make/break ratio is available for ten pulses per second
dialpulsing
• variable inter-digit pause time is flexible and can be assigned in LD 56
for digitone and dialpulse digits
• two additional DTMF outpulsing rates are available and assigned in LD
17, and
Operating parameters
There are no operating parameters associated with this feature.
Feature interactions
There are no feature interactions associated with this feature.
Feature packaging
This feature is packaged under, Flexible Tones and Cadences (FTC)
package 125.