Instruction manual

Page 1528 of 3156 Flexible Feature Codes
553-3001-306 Standard 10.00 January 2002
To return the telephone to the originally defined Class of Service:
1 Dial the Electronic Lock Deactivate (ELKD) code.
2 Dial the SCPW. The telephone’s Class of Service is changed to the
values defined in LD 10 and LD 11.
Because the Class of Service defined for CCRS in LD 15 is usually lower
than the Class of Service defined in LD 10 or LD 11, the Class of Service for
a telephone is lowered by dialing the Electronic Lock Activate (ELKA) FFC
and the password associated with that telephone. The user can activate from
a remote telephone by dialing the ELKA FFC, the SCPW and the Directory
Number to be changed. The same operation can deactivate the feature, using
the Electronic Lock Deactivate (ELKD) code programmed in LD 57.
ELK operation has the following requirements:
• CCOS allowed, with CCSA Class of Service in LD 10 and LD 11, and
CCRS defined in LD 15
• Set the password length in LD 15, at the SCPL prompt
• Add passwords in LD 10 and LD 11, at the SCPW prompt, and
• FFCT = YES in LD 57.
To change the SCPW for ELK:
1 Select a free extension.
2 Dial the SCPC code.
3 Dial the SCPW for your telephone.
4 Dial the new password.
5 To confirm, dial the new password again.
6 Hang up or press Rls.