Instruction manual

Flexible Dial Tone Detection Page 1505 of 3156
Features and Services
LD 16 – Set data for Flexible busy/overflow time:
LD 56 – Create tone and ringing parameters for one or more customers:
Feature operation
No specific operating procedures are required to use this feature.
Prompt Response Description
...
DTD (NO) YES Dial Tone Detection (is not) is to be performed on this route.
SCDT (NO) YES Secondary dial tone (will not) will be used on route.
Prompt Response Description
...
TYPE FDTD Flexible Dial Tone Detection data.