Instruction manual

Page 1496 of 3156 Flexible Attendant Call Waiting Thresholds
553-3001-306 Standard 10.00 January 2002
LD 21 – Print Routine 2 is modified to include OPT FACD or FACA setting and the new CWCL
range settings in the Customer Data Block printout.
LD 93 – As for the Customer Data Block, the CWCL threshold usage is changed with the selection
of a FAC option in the Customer Data Block.
Note: The lower and upper call waiting thresholds must be redefined
whenever they are changed between number of calls and percentage
definition. Respond to the CWCL prompt with the new definitions.
- OPT (FACD) FACA Options for customer: (Flexible Attendant Call Waiting
Thresholds Denied), Flexible Attendant Call Waiting
Thresholds Allowed.
(Denies), Allows the attendant Call Waiting thresholds to be
defined as a percentage of active attendants.
...
- CWCL xxxyyy
(0)-255(0)-255
(0)-1000(0)-1000
Call Waiting Lamp thresholds
Where xxx defines the lower threshold and yyy defines the
upper threshold.
Valid ranges for number of calls when FACD is entered in
response to OPT.
Valid ranges for percentages when FACA is entered set in
response to OPT.
Prompt Response Description
REQ PRT Request: Print data block.
TYPE CDB Type of data block: Customer Data Block.
CUST 0-99
0-31
Customer number.
For Option 11C.
Prompt Response Description
REQ CHG NEW PRT Request: Modify, create or print data block.
TYPE CPGP Type of data block: Console Presentation Group
Parameters.