Instruction manual

Page 1488 of 3156 FCC Compliance for Equal Access
553-3001-306 Standard 10.00 January 2002
This feature does not support network signaling, since the intention is to
restrict Equal Access calls directly terminating at the Central Office and not
at another network node.
This feature does not restrict calls made by an attendant.
The # sign is not outpulsed by Meridian 1 systems, as recommended in the
FCC Bellcore North American Dialing Plan.
The operator cut-through dialing sequence of 10XXX#, which is
recommended in the FCC Bellcore North American Dialing Plan, is not
supported on Meridian 1 systems.
Feature interactions
New Flexible Code Restriction
The New Flexible Code Restriction (NFCR) feature has been modified to
allow for the restriction of Equal Access international toll calls
(10XXX+011+CC+NN) while not restricting Equal Access operator calls
(10XXX+0).
Feature packaging
This feature is not packaged, however the following packages are required to
make it operational: Network Class of Service (NCOS) package 32 is
required for both the General Carrier Restriction and Selective Carrier
Restriction methods; and New Flexible Code Restriction (NFCR) package 49
is required for the Selective Carrier Restriction method.
Feature implementation
Task summary list
The following is a summary of the tasks in this section:
1 LD 16 – Apply Equal Access call restriction to this route.
2 LD 87 – Specify whether Equal Access with a NCOS group is to be
associated or not.