Instruction manual

Page 1008 of 3156 China – Flexible Feature Codes
553-3001-306 Standard 10.00 January 2002
Feature packaging
China – Flexible Feature Codes is contained in base X11 system software.
The following packages are required for feature activation:
• Flexible Feature Codes (FFC) package 139
• Busy Number Redial also requires the Autodial functionality that is
contained in Optional Features (OPT) package 1
• Customer Call Forward also requires the Call Forward All Calls
functionality contained in Optional Features (OPT) package 1 and
Special Service for 2500 Sets (SS25) package 18
• Outgoing Call Barring also requires the New Flexible Feature Code
Restriction (NFCR) package 49
Feature implementation
Task summary list
The following is a summary of the tasks in this section:
1 LD 15 – Define the basic setup for all three of the FFC-based features.
2 LD 56 – Define Confirmation Tone.
LD 15 – Define the basic setup for all three of the FFC-based features.
Prompt Response Description
REQ: CHG Change existing data.
TYPE: FFC Gate opener.
CUST xx Customer number.
- FFCS (NO) YES (Do not) change Flexible Feature Code end-of-dialing
indicator.
- STRL 1-3 String Length of end-of-dial indicator.
- STRG xxx String to indicate end-of-dialing. Up to three digits as
defined by STRL. Digits 0-9 and “#” are valid entries.
REQ CHG Change.