Instruction manual

Page 1446 of 3156 Extended DID/DOD Software Support – Europe
553-3001-306 Standard 10.00 January 2002
Note: BARA CLS must be configured on the XDID trunk for the
described process to occur.
XDID/DOD and XFCOT
Software support for European XDID/DOD cards and software support for
European XFCOT cards provide similar functionality in the following areas:
• Trunk Failure Monitor processing
• Downloading of PPM information
• Configuration and downloading of static pad setting for short line and
long line, and
• Configuration download processing. Fields that are not filled due to
configuration limitations are left blank and are not validated or
interpreted by the firmware. The fields are treated as unused fields.
The DTCR (Digit Collection Ready) prompt has replaced the DTRA
(Digitone Receiver Attached) prompt in LD 14.
Feature packaging
M1 Superloop Administration (XCT1) package 205.
Dependencies: Meridian 1 XPE (XPE) package 203; International
Supplementary Features (SUPP) package 131; ISDN Supplementary
Features (ISDNS) package 161; PPM/Message Registration (MR) package
101; and Trunk Failure Monitor (TFM) package 182.
Feature implementation
Task summary list
The following is a summary of the topics in this section:
1 LD 15 – In the Customer Data Block, allow DID to TIE connections:
2 LD 16 – Define a DID/DOD trunk route for Germany and Switzerland:
3 LD 14 – Define an XDID card unit: